Sense-Ware 防爆火焰探測器

SenseWare UV紫外火焰探測器
SenseWare UV-185/5CZ防爆火焰探測器

產品型號：UV-185/5CZ
產品型號：UV-185/5CZ
產品型號：UV-185/5CZ

杭州富昌科技有限公司是SenseWare的中國區總代，提供品牌全系列火焰探測器產品，包括紫外、紅外、紫外紅外復合火焰探測器，以及火焰探測器測試燈；

火焰探測器型號包括防爆紫外紅外火焰探測器UV/IR-210/1CZ、防爆紫外火焰探測器UV-185/5CZ、防爆紅外火焰探測器IR3-109/1CZ等；

火焰探測器測試燈包括TC-169/1、TC-940/1Z。

The SENSE-WARE UV Flame Detector utilizes a microprocessor for sophisticated electronic signal analysis. The ultraviolet flame detector is suitable for indoor and outdoor applications. Because of its non-corrosive housing it is suitable for indoor industrial areas were corrosion may play a role. UV (Ultraviolet) energy is emitted by almost every fire; both hydrocarbon and non- hydrocarbon fires. The Ultraviolet Flame Detector will alarm to Arc Welding. To prevent unwanted alarms, for example, electric arcs and or uncovered halogen lamps, the delay time for an alarm is 8-10 seconds. This is sufficient for 90% of the applications. The UV Flame Detector is suitable for applications that include Hydrogen, Radio Amplifier and Antennas but also Heating Rooms for chemicals and Inside Fume hoods in laboratories. A self-test is performed every hour to make sure the sensor and electronics operate well. A Test Lamp is available for regular inspections and end-to-end testing.

• Sensitive to virtually all fires
  including Hydrogen Flames 
•  
• The UV flame detector is resistant to artificial- and sunlight
•  
• Automatic sensor test
•  
• Ultraviolet flame detectors are suitable for indoor and outdoor applications
•  
• Operating temp.: -40 to +70°C (in Safe Area’s only)
•  
• GRP housing
•  
• Relay output for Alarm and Fault
•  
• Sinking 4-20 mA output (stepped)
•  
• CPR-EN54-10 certified
•  
• FM class 3260 approved
•  
• ATEX certified: II 3G  Ex nA IIC T4 Gc, II 3D Ex tc IIIC T 71°C Dc IP65, ambient temp.: -25° to +70°C
•  
• cFMus class 3611 (Nonincendive, Class I, II and III, Div 2), ambient temp.: -25° to +70°C
•  
• California State Fire Marshal (CSFM) listed
•  
• UV-185/5CZ, with CPR/EN54-10 approval and suitable for ATEX cat. 3 for zone 2/22, FM class 3260 and cFMus class 3611 Approved.
•  

[  認證  ]

? FM、CE、ATEX