ZY6039C自動插拔力(壽命)試驗機
Automatic insertion force tester (life)
本試驗機用于檢測各種連接器的插入力和拔出力。力度的處理采用微電腦電路板，具有峰值保持功能，顯示精度高，讀數穩定。具有連續插拔功能；可任意設定插拔次數，即到達設定次數后自動停機；插入部分有防呆功能，可避免人為損壞傳感器及連接器。傳動機構采用無噪齒輪，運行勻速，無噪音，夾具是通用夾具，適用于不同的連接器。也可作連接器插拔壽命試驗。
This machine is applied to the detection of various connector insertion force and drawing output. The strength
of the circuit board processing by microcomputer, with peak value holding function, shows high precision,
stable reading. With continuous insertion functions; Can be set arbitrary number of plug, namely to set number
of times after automatic stop; Insert some fool proof function, can avoid man-made damage to the sensor and
the connector. Transmission mechanism adopts gear noise, and at a constant speed operation, no noise, clamp is
general, applicable to different connector. Also can make the connector plug life test.
行程zui大值(不含夾具) 150mm。
速度調節 采用變頻調速，25~300mm/min任意可調，數碼顯示
計數 99999位，任意設定，LED數字顯示。
測量范圍 10、20、30、50kg任選
插入/拔出力分辨率 0.01kg
位移：帶位移控制 控制精度0.01mm 控制行程0~25mm
寸動 上升、停止、下降 采用X、Y軸、
相位調節 X、Y軸調節 范圍0~15mm 分辨率0.01mm
相位調節范圍 0~360°
Speed regulation with frequency control of motor speed, 25 to 300 mm/min arbitrary adjustable, digital display
Count of 99999, set arbitrary, LED digital display.
Measuring range colors, 10, 20, 30, 50 kg
Insert/pull output resolution is 0.01 kg
Displacement: displacement control accuracy 0.01 mm control 0 to 25 mm
Inching up, stop, down the X, Y,
Phase adjustment X, Y axis adjustment range of 0 ~ 15 mm resolution of 0.01 mm
Phase adjusting range is 0 ~ 360 °
本頁產品地址：http://m.lgsztm.com/sell/show-4366951.html
免責聲明：以上所展示的[ZY6039C 自動插拔力(壽命)試驗機]信息由會員[東莞中諾臺灣質檢儀器設備有限公司]自行提供，內容的真實性、準確性和合法性由發布會員負責。
